[The coolant]
The coolant consists of refrigerant and distilled water,has the function of anti-freezing,The coolant will prevent
engine from overheating in neutral rotation or rotating in low speed,It also prevent radiator from harmful substance.
[In-pouring of coolant]
1.Place the motorcycle on flat ground, unfold the side stand.
2.unscrew the coolant temperature switch,and pour the coolant into the radiator until it is filled.
3.Screw the cap on the radiator tightly.
4.Start the motorcycle .When the temperature of the coolant reaches about 80 degree,stop the engine for 5 minutes,
then open the radiator to pour the coolant into until it is filled,and screw the cap tightly.Pour the coolant circularly
in this way three times.
5.Open the cap,pour 400ml coolant into the radiator,then the total capacity of coolant will be 1600ml.The coolant
temperature switch and the cap,please refer to picture 1 and picture 2 .
COOLING SYSTEM
Temperature control cap
Kettle cover
Water pipe
Sensor
37
