Regada UP 0, Installation, Service And Maintenance Instructions, Page: 4 / 59

2 UP 0, UP 1, UP 2, UP 2.4, UP 2.5
The Installation, Service and Maintenance Instructions are drawn up according to requirements of EC Executive
Nr. 89/392/EEC "Uniform requirements for machines and devices from the point of view of safety and health
care", to save life and health of users and to avoid material damages and exposure environment to danger.
1. General data
1.1 Purpose and applications
Electric part-turn actuators (hereinafter EA ) types UP 0, UP 1, UP 2, UP 2.4, UP 2.5 (hereinafter UP X.X )
are high-powered electric-mechanical products, designed for direct installations onto controlled devices
(regulating bodies -valves, etc.). EA of
UP X.X types are provided for remote control of closing bodies, and EA
with controller for automotive control of regulating bodies in both directions of their movement. They can be
equipped with means of measuring and control of technological processes where an unified analogue direct
current or voltage signal is an information bearer on their input and/or output. They can be used in heating,
energy, gas, air-conditioning and other technological systems, which they are suitable for, regarding their
features. They are connected with controlled devices with a flange according to ISO 5211 and a coupling or
using a stand and a coupling/a lever.
.
1. It is forbidden to use EA as a lifting mechanism!
2. Switching of actuator by a semiconductor switches have to be consulted with producer.
1.2 Safety instructions
Product characteristics from risk point of view
EA are reserved technical devices with higher rate of danger (group A), with possibility of
installation in areas specially danger regarding casualties caused by electric current.
Electric actuators are according to directive LVD 2014/35/EU and standard EN 61010-1 within valid edition
assigned for installation category II (overvoltage category), pollution degree 2.
The product meets the essential safety requirements according to EN 60204-1 and is in compliance with
EN 55011/A1 within valid edition.
Product influence to environment
Electromagnetic compatibility (EMC):
the product complies with the requirements of the Directive
2014/30/EU of the European Parliament and of the Council on the approximation of the laws the Member
States relating to the electromagnetic compatibility and with the requirements of standards as well EN/IEC
61000-3-3 and EN/IEC61000-3-2 within valid edition.
Vibrations caused by the product: product influence is negligible.
Noise produced by the product: The maximum allowable noise level (A) of the product measured in a
place of operation is 78 dB (A).
Requirements for specialized skills of persons performing assembly, operation and maintenance
Electric connection can be performed only by an acquainted person, i.e. an electrical engineer with
professional education of electrical engineering at an apprentice school or a technical school
(secondary, complete secondary or university education) and whose qualification was verified by an
educational facility authorised to verify professional qualification.
Instructions for stuff training
Service can be performed only by workers professionally qualified and trained by the producer or
contracted service centre!
Warning for safety use
Product protection
EA UP X.X have own short-circuit protection, therefore there must be included suitable protective
device into the supply power ( circuit breaker, or fuse), which serves at the same time as main switch.
Type of equipment from a connection point of view: The equipment is designed for permanent
connection.
!
!