Reflexonic® Viberect®
Page 11 of 16
VIBERECT X3 User Guide 2014-Rev-0
CLEANING
To ensure that your
Viberect
®
device is always ready for use, it is recommended
to clean both vibrating pads and the entire surface, and to recharge the battery
after each use.
Wipe the outside of the vibrator with a dry or alcohol-dampened cloth. Do
not immerse the Viberect in any type of fluid.
It is important to wipe off any lotion or moisture off the pads and body of the
device after each use with a clean dry cloth and to wipe them with alcohol
pads.
Removal and Replacement of Viberect
®
Soft Pads
If the Viberect Soft Pads start showing any signs of wear and/or degradation,
replace them immediately. Specifically,
check the surface of the pad over-
mold for any signs of wear/degradation and replace if needed; and
check the
integrity of the pad-pad over-mold assembly. Simply pull each pad, in the
direction directly away from the body of the device (see image). Place new pads
by easily snapping them into the pad attachment. Make sure device is in the
OFF position when replacing the pads. Dispose old pads in a closed trash
container.
Additional pads can be purchased from
www.reflexonic.com
Viberect Soft Pads or
Pad Over-Molds
PG.11
2216682-A.indd 11
10/24/14 5:52 AM
