Operation
Servitec 35-120 with Touch controller — 06.07.2016 - Rev. B
English — 47
8
Operation
8.1
Operating modes
8.1.1
Automatic mode
Activate Automatic mode. Automatic mode is continuous device operation.
The following functions are active in Automatic mode:
•
Facility and make-up water degassing.
•
Automatic make-up with water.
– Automatic make-up with water is an optional function, see chapter 4.6 "Optional equipment and accessories" on page 17 .
The device controller monitors the functions. Faults are displayed and evaluated.
To start the Automatic mode, proceed as follows:
•
Touch the "AUTO" button.
Servitec-35
System
NSP
9.5 bar
Continuous degassing
Select a degassing programmed for Automatic mode. The Customer menu provides three different degassing programmes for selection,
see chapter 4.4 "Function" on page 14 .
•
Continuous degassing.
•
Interval degassing.
•
Degassing the make-up water.
For selecting the degassing programmes, see chapter 7.8 "Setting the degassing programme in the Customer menu" on page 45 .
The controller displays the selected degassing programme in the message line.