Notes on the operating manual
Vacuum spray degassing — 03.11.2014
English — 5
1
Notes on the operating manual
This operating manual is an important aid for ensuring the safe and reliable functioning of the device.
The operating manual will help you to:
•
avoid any risks to personnel.
•
become acquainted with the device.
•
achieve optimal functioning.
•
identify and rectify faults in good time.
•
avoid any faults due to improper operation.
•
cut down on repair costs and reduce the number of downtimes.
•
improve the reliability and increase the service life of the device.
•
avoid causing harm to the environment.
Reflex Winkelmann GmbH accepts no liability for any damage resulting from failure to observe the information in this operating manual.
In addition to the requirements set out in this operating manual, national statutory regulations and provisions in the country of
installation must also be complied with (concerning accident prevention, environment protection, safe and professional work practices,
etc.).
This operating manual describes the device with basic equipment and interfaces for optional equipment with additional functions. For
optional equipment and accessories, see chapter 4.6 "Optional equipment and accessories" on page 14 ..
Notice!
Every person installing this equipment or performing any other work at the equipment is required to carefully read this
operating manual prior to commencing work and to comply with its instructions. The manual is to be provided to the
device operator and must be stored near the device for access at any time.
2
Liability and guarantee
The device has been designed using state-of-the-art technology and in accordance with generally recognised technical safety
regulations. Nevertheless, its use can pose a risk to life and limb of personnel or third persons as well as cause damage to the system or
other property.
It is not permitted to make any modifications at the device, such as to the hydraulic system or the circuitry.
Warranty and liability claims will not be accepted by the manufacturer if these can be traced back to one or more of the following causes:
•
Improper use of the device.
•
Improper start-up, operation, maintenance, servicing, repair or installation of the device.
•
Failure to observe the safety information in this operating manual.
•
Operation of the device with defective or improperly installed safety/protective equipment.
•
Failure to perform maintenance and inspection work according to schedule.
•
Use of unapproved spare parts and accessories.
Prerequisite for warranty claims is the proper handling of the device.
