23
19. Simulator function
If required, you can also use the transmitter on the PC for simulation purposes or games. In this case, you will need a
USB interface cable and appropriate software for the computer (e.g., car racing games, etc.).
The USB interface cable is connected to the PC interface socket on the left side of the transmitter (see Figure 1,
Pos. 5). When properly connected, installed and turned on, the transmitter is recognised by the operating system (for
example, at least Windows XP or higher) and can be used as a standard joystick.
For all other information, refer to the user manual of the USB interface cable.
20. Maintenance and cleaning
This product does not require maintenance. Never attempt to disassemble the product (except for inserting or replac-
ing the batteries as described in these instructions).
Clean the exterior of the remote control with a soft, dry cloth or brush. Never use abrasive cleaning agents or chemical
solutions, as these may damage the surface of the case.
21. Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this product conforms to the
2014/53/EU directive.
Click on the following link to read the full text of the EU Declaration of Conformity:
www.conrad.com/downloads
Select a language by clicking on the corresponding flag symbol, and then enter the product order number
in the search box. The EU Declaration of Conformity is available for download in PDF format.
