10
10. Using the transmitter
The numbers used in these instructions refer to the illustration alongside the text or the illustrations within
the respective section. Cross-references to other figures are indicated with the corresponding figure num
-
ber.
a) Inserting the batteries
To power the transmitter, you need four alkaline batteries, size AA/Mignon.
Proceed as follows to insert the batteries:
The battery compartment lid (1) is located on the bottom of
the transmitter. Press the corrugated surface (2) and slide
the cover off in the direction of the arrow.
Now insert four batteries into the battery compartment.
Ensure the correct polarity of each of the cells. The nega-
tive pole (housing) of the battery (3) must be in contact
with the spiral spring (4). A corresponding note (5) can
also be found on the bottom of the battery compartment.
Slide the lid back on and ensure that it clicks into place.
Figure 3