12
11. Setting up the receiver
a) Connecting the receiver
The receiver allows you to connect three servos (receiver
output CH1, CH2, CH3) and a receiver rechargeable bat-
tery (Bind/VCC). The connections are designed for polari-
ty-proof Futaba connectors and can also be used with JR
connectors, if necessary.
When connecting servos and speed controllers, pay close
attention to the correct polarity of the plug connectors.
The plug contact for the impulse line (depending on the
manufacturer either yellow, white or orange) must be con-
nected to the inner (left) pin contact.
The plug contact for the negative line (according to the
manufacturer, black or brown) must be connected to the
outer (right) pin contact.
The servos and the receiver power supply can be connected in different ways depending on the model in which the
remote control system is used.
Output
Combustion model vehicle
(Connection diagram Figure 6 A)
Electric model with speed controller
(Connection diagram Figure 6 B)
CH1
Steering servo
Steering servo
CH2
Throttle/brake servo
Speed controller
CH3
Servo for special functions *
Servo for special functions *
BIND / VCC
Battery box/receiver rechargeable battery
**
Figure 6
Figure 5
