36
If you continue to scroll up the display, other setting options will be displayed:
Figure 20b
"Speed":
Here you can set the control compliance of the model. Analogous to the information in chapter 11. e), here you can
choose between the beginner and advanced mode by tapping.
"Calibrate accelerometer":
This function is used to calibrate the sensors (gyros). Refer to the instructions in section 12.
"Calibrate magnetometer":
This function is used to calibrate the compass. When using this function, the model LEDs will flash quickly. Please
observe the notes in chapter 12.
c) Functions under "Param"
Here, different factory settings are displayed. Although the values can be changed, they have no effect on any of the
quadcopter's features. After you restart the app, changed values will be reset to the factory settings.
Figure 21