9
9. Operating Elements of the Transmitter
Figure 1
1 Transmitter aerial
2 Dial switch for channel 8
3 Carrying handle
4 Switch for channel 9
5 Switch for channel 10
6 Trimming button for channel 2
7 Control stick for channel 1 and 2
8 Trimming button for channel 1
9 LED Display
10 On/off switch
11 Reverse switch for channel 1 - 4
12 Mixer switch
13 Binding button
14 Trimming button for channel 4
15 Control stick for channel 3 and 4
16 Trimming button for channel 3
17 Switching button for channel 5
18 Switching button for channel 6
19 Carrying belt eyelet
20 Dial switch for channel 7
The toggle switches for channels 5, 6, 9 and 10 each have a centre position and two end positions. The
switches for channels 5 and 6 are buttons that independently spring back to the middle position. The
switches for channels 9 and 10 remain in the respective switching position until they are actuated again.
Servos that are operated on the four switch channels can be switched to three different positions with the
switches.
Servos operated on channels 7 and 8 can be controlled smoothly from one end stop to the other with the
two dial switches.
