27
21. Simulator Function, Student Transmitter Function
If required, you can also use the transmitter at the PC for simulations or games. In this case, you will require the
optional USB cable (Conrad item no. 517956) and suitable computer software (e.g. flight simulation games, etc.).
The USB cable is connected to the PS2 interface socket
(1) at the rear of the transmitter.
At correct connection and proper installation, the acti-
vated transmitter is recognised by the operating system
(e.g. at least Windows XP or higher) and can be used
like a commercial joystick.
For all further information on this, see the operating in-
structions of the USB cable.
Alternatively, the signal output of the remote control may
be used to control a teacher transmitter. In this case, the
remote control "HT-10" acts as the student transmitter.
Further information on this can be found in the operating
instructions of the teacher transmitter.
22. Maintenance and Care
Clean the exterior of the remote control with a soft, dry cloth or brush only. Never use abrasive cleaning agents or
chemical solutions as these could damage the surfaces of the casings.
Figure 18
