21
18. Mixer Function
The remote control "HT-10" has a mixer function that can be activated with the mixer switch (also see figure 1, item
12). When the slider is in the bottom position, regular operation without mixer function is active. If the slider is pushed
up, channel 1 "CH1" and channel 2 "CH2" will be mixed.
Use of the mixer in a plane model:
For a delta plane model with triangular wing, the ailerons also have to perform the elevator function. For this reason,
such models require a mixer. No matter whether the transmitter controls the aileron or elevator function then, the
servos at the receiver outputs "CH1" and "CH2" will always react at the same time then.
The servo of the left wing has to be connected to the receiver output "CH1" and the servo of the right wing to the
receiver output "CH2". The deflections of the two rudder flaps have to be according to the figures in figure 13.
If required, the servo directions can be corrected with the reverse switches.
Figure 13 on the next page shows the assignment of the lever movements to the aileron movements.
