10
3. Pull the trigger to open the clamp and clamp onto the wire.
4. The LCD will display the current value.
5. If the instrument beeps and the LCD display flashes, the current
measurement is exceeding the critical set alarm. Refer to
Setting the
Critical Alarm
for details.
Note:
If the current being measured exceeds the instruments max range,
the display will indicate OL A: as show below.
Data Hold & Memory Storage
The instrument has the capability of storing up to 99 values. Stored values
are not lost when instrument is turned on or off.
1. While taking a measurement, press the
HOLD
button to save the
current reading.
2. While in this mode "HOLD" will appear along with the current stored
value and sequence number.
3. Press the button again to resume normal operation.
Note:
When the Data Hold feature is active the instrument will not turn OFF.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
