background image

13

Product Warranty

REED Instruments guarantees this instrument to be free of defects in 
material or workmanship for a period of one (1) year from date of shipment. 
During the warranty period, REED Instruments will repair or replace, at no 
charge, products or parts of a product that proves to be defective because 
of improper material or workmanship, under normal use and maintenance. 
REED Instruments total liability is limited to repair or replacement of the 
product. REED Instruments shall not be liable for damages to goods, 
property, or persons due to improper use or through attempts to utilize the 
instrument under conditions which exceed the designed capabilities. In 
order to begin the warranty service process, please contact us by phone at 
1-877-849-2127 or by email at [email protected] to discuss the 
claim and determine the appropriate steps to process the warranty.

Product Disposal and Recycling

Please follow local laws and regulations when disposing or recycling your 

instrument. Your product contains electronic components and must be 

disposed of separately from standard waste products.

Product Support

If you have any questions on your product, please contact your authorized 
REED distributor or REED Instruments Customer Service by phone at 
1-877-849-2127 or by email at [email protected].

Please visit 

www.REEDINSTRUMENTS.com

 for the most  

up-to-date manuals, datasheets, product guides and software.

Product specifications subject to change without notice.  

All rights reserved. Any unauthorized copying or reproduction of  

this manual is strictly prohibited without prior written permission  

from REED Instruments.

 

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Summary of Contents for R5700















Reviews: