12
Setting the Critical Alarms
1. Press the
AL
button to turn the critical alarm mode ON or OFF.
2. Hold the
AL
button for approximately 3 seconds to enter the critical
alarm set up mode.
3. Press the
AL
button to toggle between digits.
4. Press the and arrows to adjust the flashing digit.
Note:
The maximum set critical alarm value that can be set is 199Ω/499mA.
5. Press the
AL
button to confirm your selection and proceed to the
next digit.
6. Hold the
AL
button for approximately 3 seconds to exit the critical
alarm set up mode and resume normal operation.
Note:
When the critical alarm is enabled, the instrument will begin to beep
if the measured vale exceeds the selected alarm.
7. Follow steps 1 to 6 to set the critical alarm in mA.
Battery Replacement
When the
icon appears on the LCD display, you will need to replace
the batteries. Remove the battery cover using a Phillips head screwdriver,
insert 4 x new AA batteries and secure the cover.
Product Care
To keep your instrument in good working order we recommend the following:
• Store your product in a clean, dry place.
• Change the battery as needed.
• If your instrument isn't being used for a period of one month or longer
please remove the battery.
• Clean your product and accessories with biodegradable cleaner. Do not
spray the cleaner directly on the instrument. Use on external parts only.
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
