7
3
3. Slide the Shield Cover (5) upward onto the
Upright (4).
Have a second person hold the Shield Cover (5)
around the Upright (4) until you complete step 4.
Tip: Avoid pinching the wires inside the
Frame (1).
Slide the Upright (4) onto the Frame.
Attach the Upright (4) with five M8 x 16mm
Screws (60) and five M8 Split Washers (61).
4. Locate the two wire ties inside the Upright (4).
Next, locate the Main Wire Harness (89) and the
Upper Wire Harness (41) inside the Frame (1).
Tie the lower end of one wire tie to the Main Wire
Harness (89). Tie the lower end of the other wire
tie to the Upper Wire Harness (41).
Next, pull the upper end of the first wire tie
upward until the Main Wire Harness (89) is
routed through the Upright (4). Then, pull the
upper end of the other wire tie upward until the
Upper Wire Harness (41) is routed through the
Upright.
Then, slide the Shield Cover (5) downward and
press it onto the Right and Left Front Shields
(21, 22).
4
60
60
41
21
60
61
61
61
4
4
5
5
1
Wire Ties
Wire
Ties
Avoid pinching
the wires
22
1
89
