10
8. Apply grease to two Wave Washers (88) and to
two Thrust Washers (66).
Slide the Left Handlebar (19) onto the
Handlebar Axle (16). Next, slide a Wave Washer
(88) onto the end of the Handlebar Axle.
Slide an M8 Small Washer (18) and an Axle Cap
(41) onto an M8 x 19mm Button Screw (56).
Next, slide a Thrust Washer (66) onto the shoul-
der of the Axle Cap (41). Then, tighten the M8 x
19mm Button Screw (56) a few turns into the
end of the Handlebar Axle (16).
Make sure that the Thrust Washer (66)
remains on the shoulder of the Axle Cap (41),
and that the Wave Washer (88) remains on
the end of the Handlebar Axle (16).
Assemble the Right Handlebar (20) in the
same way.
Then, tighten both M8 x 19mm Button Screws
(56) at the same time.
8
1
56
18
56
41
41
88
88
16
20
66
18
19
66
Grease
Grease
9. Apply grease to the barrel of an M8 x 55mm Bolt
Set (92) and to a 7mm Spacer (55).
Slide an M8 Washer (69) and the 7mm Spacer
(55) onto the barrel of the M8 x 55mm Bolt Set
(92).
While a second person holds the front end of the
Left Pedal Leg (14) inside the bracket on the left
Handlebar Leg (17), insert the barrel of the M8 x
55mm Bolt Set (92) through both parts.
Next, slide a 7mm Spacer (55) and an M8
Washer (69) onto the end of the barrel of the M8
x 55mm Bolt Set (92).
Then, turn the screw of the M8 x 55mm Bolt Set
(92) a few turns into the barrel.
Do not over-
tighten the Bolt Set; the left Handlebar Leg
(17) must pivot freely.
Attach the right Handlebar Leg (not shown)
to the Right Pedal Leg (13) in the same way.
See step 7.
Tighten the four M8 x 38mm Button
Bolts (58).
14
13
9
92
17
92
55
55
69
69
Grease
All manuals and user guides at all-guides.com
