STRONG DESIGNS RW EDGE 540V3 30CC
16
Ignition Module
•Choose a location for the ignition model a few
inches or more away from the throttle servo if
possible. There are precut slots on the motor
box to secure the ignition module on the side.
•Secure into position using sticky backed Velcro
and secure with the included Velcro strapping.
From the Pro:
Layer the Velcro to create a soft
mount and do not over tighten the straps. A
loose but secure mount
will lessen vibration
to ensure long life of
the module.
•Route the leads to the plug and hall sensor
using the wire loom supplied with the engine as
needed.
NOTE:
While not required the use of an
electronic kill switch is strongly recommended.
