STRONG DESIGNS RW EDGE 540V3 30CC
10
•Install the tailwheel bushing
to the carbon fiber mount.
Then install the wheel to the
wire using the wheel collar
and then secure the assembly
using the upper retainer.
From the Pro:
File a flat spot for the wheel collar on
the wire and use medium thread locking compound
to install the setscrews.
•Next install the tiller pin into the rudder. Drill
a 1/8” hole in the bottom of the rudder 3.5"
back from hinge line. Clean the tiller pin with
alcohol and coat inside of the hole in the rudder
15 min epoxy and insert the end of the pin.
•There are blind nuts preinstalled for the
tailwheel bracket. Locate the blind nuts, align
the tailwheel assembly and install the screws
using a thread locking compound.
NOTE:
You may need to bend the tiller wire a
bit for alignment.
