M003 Issue: 1.5 Created by: Technical Dept.
25
February 2020
Glossary of Terms
CANBUS
A vehicle bus standard designed to allow electronic control units and devices to communicate with
each other in applications without a host computer
CAP168
The standards required at aerodromes relating to management systems, operational procedures,
physical characteristics, assessment and treatment of obstacles, visual aids, rescue and fire-fighting
services and medical services
CFD
Computational Fluid Dynamics
Config
Configuration function of a Lightbar
DC
Direct Current
Default
Preset value of a user configurable function
Dim
A function to reduce the full brightness of a Lightbar
ECE R65
United Nations standard for beacons, lightbars and other vehicle warning lamps
F1 - F9
Programmable Inputs
ft/lb
Foot-Pounds
fpm
Flashes Per Minute
Gnd
Ground
(high current connector)
in/lb
Inch-Pounds
IP
Ingress Protection Rating
Inclusion Flag
Enable/Disable programmed function as part of the flash pattern
Kg/cm
Kilogrammes Per Square Centimetre
LED
Light Emitting Diode
mA
Milliamps
Nm
Newton Meter
Module
Bullitt Advanced LED slave board
Pat
Pattern Select
(change flash pattern of the Lightbar)
R65 Monitor
A positive output to indicate that R65 is functioning
Serial
Serial interface connection
Standby Mode
Lightbar is connected to a power source & fused correctly
S/T/I
Stop/Tail/Indicator
Sync
The matching of Redtronic products to enable them to flash together
TDIR
Traffic Director
Torque
Application of force acting at a radial distance and tending to cause rotation
+ve
Positive
-ve
Negative
V+
Power in positive
(high current connector)
360 O/P 1
Primary Lightbar Output
(flash entire bar)
360 O/P 2
Secondary Lightbar Output
(programmable)
