Redline Communications RedCONNEX AN-80i PMP, User Manual

Page: 76 / 94

Red CONNEX TM
AN-80i
User Manual
70-00072-01-04b Proprietary Redline Communications © 2007 October 31, 2007
Page 76 of 94
Table 28: CLI - show
√ √ snmp : list the SNMP Configuration.
Example:
Trap Configuration:
SNMP Enabled:
On
Traps Enabled: On
Trap Link Up/Down Enabled: On
0: 192.168.23.254 : 162 : public
√ √ stats
<id> - <id>
Example:
(show)# stats 14
General Information :
sysname = abcdef
sysdescr = b
sysloc =
c
syscontact = d
mac
= 00:09:02:00:bb:77
boardtype = AN-80i Rev 1.0
radiotype = T54i
swver
= 10.00.023 (other: 10.00.019)
sysuptime = 8 day(s), 20 hr, 19 min
sysstarttime = N/A
sysmode = pmpsc
rffreq =
5490.0
txpower = 10
chwidth = 20 MHz
rfstatus = 0 *
Ethernet Statistics :
erxpkt = 3081
erxpktd = 0
etxpkt =
8089
Wireless Statistics :
regstations = 0
regconn = 0
activelinks = 0
activeids = 0
Wireless Ethernet Statistics :
werxpkt = 4592
werxpktdis = 0
werxpkterr = 0
wetxpkt = 0
wetxpktdis = 0
wetxpkterr = 0
* Status codes are displayed in binary format. See section 6.4: Status Codes on page 83
for details of the RF status codes.
5.3.15 Snmpcommunity
Use the snmpcommunity command to configure SNMP community permissions.
Table 29: CLI - snmpcommunity
PTP PMP Description
√ √ add : add a new snmp community to the snmp community table. The
index value is assigned automatically. Up to eight community entries can
be entered in the table.
snmpcommunity add <name> <string> <Enter>
snmpcommunity add <rights> 0 | r | w | rw <Enter>
Where.
0 (zero):Deny read and write permission.
r : Grant read access permission only. Deny write permission.
w : Grant write access permission only. Deny read permission.
rw : Grant read and write access permission for this community.
default : Set all snmp parameters to factory default settings.
snmpcommunity default <idx> <Enter>
del : Delete the specified community entry.
snmpcommunity del <idx> <Enter>
print : List all SNMP communities and associated permissions.
snmpcommunity print <Enter>