Ellipse
INSTALLATION GUIDELINES
70-00159-01-09
Proprietary Redline Communications © 2015
Page 10 of 52
April 29, 2015
Electrocution Hazard / Risque
D’électrocution
Warning to Service Personnel
:
48 VDC
This product is intended to be connected to a power source as per IEEE 802.3at (42.5
- 57.0 VDC), which must be electrically isolated from any AC sources and reliably
connected to Earth ground. Do not install Redline products near any type of power line.
Should the antenna or related hardware come in contact with power lines, severe bodily
harm or death could result!
Attention au personnel du service: 48V CD
Ce produit est destiné à être connecté à une source d'énergie selon la norme IEEE
802.3at (42,5 à 57,0 VDC), qui doit être isolé électriquement de toutes les sources de
courant alternatif et fiable relié à la masse de la Terre. Ne pas installer les produits
Redline près n'importe quel type de ligne électrique. Si votre antenne ou du matériel
connexe entrer en contact avec des lignes électriques, des blessures graves ou la mort
pourraient en résulter!
Radio Frequency Safety / Sécurité des Fréquences Radio
The installer of this radio equipment must ensure that the antenna is located or pointed
such that the antenna does not emit RF fields in excess of the general population limits
as defined by:
FCC CFR 47, Part 2.1091
http://www.gpo.gov/fdsys/pkg/CFR-2009-title47-vol1/pdf/CFR-2009-title47-vol1-sec2-
1091.pdf
FCC
OET Bulletin 65,
Radio frequency radiation exposure evaluation for fixed
devices
http://transition.fcc.gov/Bureaus/Engineering_Technology/Documents/bulletins/oet65
/oet65c.pdf
Health Canada limits for the general population; consult Safety Code 6, obtainable
from Health Canada
’s website:
http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php
Santé Canada limite pour la population générale; consulter le Code de sécurité 6,
disponible sur le site Web de Santé Canada:
http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-fra.php
.
Personal Safety
WARNING: HOT SURFACE. DO NOT TOUCH.
The radio platform is rated for operation at extreme ambient temperatures. When
operating in high temperature conditions, the chassis surface area can be higher than
the ambient temperature and personal thermal protection should be employed for any
maintenance or inspection activity.
Electrical Safety
The equipment meets the requirements for class I EN 60950-1 (protection against
electric shock).
All external circuits are TNV-1 (as defined in EN 60950-1).
