Redline Communications RDL-3000 Series, Installation Manual, Page: 34 / 52

Ellipse INSTALLATION GUIDELINES
70-00159-01-09 Proprietary Redline Communications © 2015 Page 34 of 52 April 29, 2015
Operation with No Options Key
Prior to installing an options key, the Ellipse will only operate in PMP SS mode (sector
controller). At a minimum, the operator must obtain and install at least one permanent
options key to enable full configuration of the Ellipse.
Table 13: Installation: Operation with No Options Key
Parameter Setting
Mode PMP SS (sector controller)
Channel 10 MHz
UBR 3 Mbps
DFS Permanently enabled
Max PIR 1 Mb/s
VLAN Data Disabled
VLAN Mgmt Disabled
Encryption Disabled
RF Frequency
*
(MHz)
3300-3800, 3650-3700, 4400-5000, 4940-4990, 5150-
5250, 5495-5600, 5650-5725, 5725-5795, 5815-5850
Note: The factory default setting for Auto Scan is 'disabled'.
4.2.5 Step 5: Required Network and Wireless Settings
Review and adjust the following parameters as required. Refer to the site survey
information.
Table 14: Installation: Ellipse Parameter Settings
Step Screen Parameter Reference Setting Value
1
Utilities
->
Product
Options
Options Key RF Plan
Enable PMP sector controller (SS)
mode, RF frequency, etc.
2 Configuration System Name Net. Plan Name for sector controller
->
System
IP Address Net. Plan IP address for sector controller
3 Configuration System Mode RF Plan PMP sector controller
->
Wireless
Channel Width RF Plan All sector controllers must use the
same setting as the base station.
RF Freq. RF Plan
All sector controllers must use the
same setting as the base station.
Tx Power RF Plan Refer to RF Plan
Antenna Gain
1
RF Plan See Mfg. Spec.
1
Notes: 1. DFS enabled systems only.
4.2.6 Step 6: Change Passwords
To ensure system security, the administrator should select the admin account and enter
a new password. User accounts should also be created to allow monitoring of the Ellipse
without access to configuration settings.
Important : It is difficult to restore access following a lost administrator password. It is
recommended to always record the administrator password and store this information in
a physically secure location for future reference.