5
The Topdresser 1005/ 1010 is used for spreading small-grained, loose material, such as
sand, small granular material or similar products. The spreading equipment of the
Topdresser is driven by a gear box with hydraulic motor for conveyor belt and a separate
hydraulic motor for the brush roll. The number of revolutions of the hydraulic system for
the conveyor belt can be continuously adjusted by means of a flow divider. Spreading
density or spreading amount can be determined by the spreader speed and conveyor belt
speed.
Technical Data
Dimensions
1005
1010
L
engt 1.10 m (44” )
...............
1.87 m ( 74 “)
Width 1.74 m (66 “)
Height 1.00 m (40”)
...............
1.30 m ( 51”)
Loading capacity
0.75 m³ (0.98 cu yd)
Weights
Authorized total weight 1700 Kg ( 3740 lbs) 1700 kg (3740 lbs)
Authorized axle load -- 1300 kg (2860 lbs)
Authorized supporting load -- 400 kg (880 lbs)
Empty weight approx. 190 kg ( 420 lbs)
....
... 270 Kg ( 600 lbs)
Spreading width
1.50 m ( 59”)
Tyre equipment
3-point linkage 4 Swing tyres Trelleborg
( no tyres) Garden Slick 18x9.50-8
Tyre pressure
-- 0.65 bar ( 9 PSI)
Speed limit
30 km/h (19 mph)
Towing capacity
30 HP, Min 1200 Kg min 13 Kw (16HP)
(2600 lbs) lift capacity
Spreading amount
continuously adjustable
Hydraulic connected load
Minimum conveying capacity towing vehicle 12 l/min (3.1 US gal/min)
Minimum pressure towing vehicle 70 bar (980 PSI)
The typeplate is fastened onto the front right-hand side of the spreader
