4
!
SAFETY REGULATIONS
!
(6) Before starting work, the operator must make himself familiar with all fittings and
controls as well as their functioning.
Spreaders must be properly attached (
Risk of injuries !
)
Before driving away, check the immediate vicinity and care for a good field of vision.
(7)
Whilst spreading is in operation, no one is allowed to enter the loading ramp.
A label with this notice is stuck on both sides of the spreader. This notice must always be
well legible and has to be replaced if damaged!
(8) Whilst the spreader is in operation, do not enter the zone of danger of the spreader since
rotating parts and foreign flying particles might cause any injuries.
(9) Adjusting and repair work on axle (wheel bearings, tyres) must only be undertaken by
properly trained and authorised personnel.
(10) Before starting work on the hydraulic system, it is important that it is without pressure.
The hydraulic hose pipes must be regularly checked and replaced if damaged or worn
out. The replacement hose pipes must conform with the manufacturer’s technical
requirements.
(11) The authorized supporting load on the towing vehicle should be noted.
(12) A sound level of 74 dB (a) is emitted in the immediate vicinity of the brush roller on the
Topdresser 1005/1010.
Used oil damages the environment; please dispose of carefully
SHORT DESCRIPTION
