HoneyBadger Installation Manual
HoneyBadger Install Version 2
Page 17 of 32
Issue Date 18/07/2022
4.3
Battery
The batteries are in the bottom section of the HoneyBadger. Additional batteries can be added in the
future
Removing or Installing a TROPPO battery:
To remove or install a battery follow these steps:
1.
Remove the battery cables by pressing the
button on the side of the terminal and pull it
straight up
NOTE: When installing the battery cable, simply
push it onto the terminal until you hear a click.
2.
Remove the bolt that holds the earth cable to
the battery
3.
Remove the bottom door by pulling the pins of
the hinge
4.
Remove the bolts the hold the Battery
Mounting Rail in place
5.
Remove the Battery Mounting Rail by sliding
upwards and out
6.
Slide out one battery at a time. Be careful as
each battery weighs 42 kilograms.
To install a battery, follow this process in reverse.
