HoneyBadger Installation Manual
HoneyBadger Install Version 2
Page 10 of 32
Issue Date 18/07/2022
Battery compartment
The bottom compartment can hold up to
eight of RedEarth’s 4.1kWh Troppo batteries.
The compartment is separated from the
inverter compartment by a sealed divider.
A perforated base supports the batteries.
Two sets of front and rear rails secure the
batteries in place. The batteries can be
removed for transportation if required.
Passive ventilation is provided via the vents in
the base of the HoneyBadger and through the
vents in the top rear of the compartment.
Attached to the top of this compartment are
two fully enclosed battery busbars with a full
set of eight pairs of battery cables included,
to allow easy connection of additional
batteries in the future.
Parts kit - HoneyBadger
The HoneyBadger is supplied with documentation and a parts kit box to complete the installation
.
Documentation: (latest versions are available online at
www.redearth.energy
)
o
User manual
o
Installation manual
o
HoneyBadger Identification sheet (serial #s etc)
o
HoneyBadger production checklist
o
MSDS – Troppo-4841 battery
Additional hardware:
o
1 x Victron Smart charger – for trickle charging a back-up
generator starter battery
o
Inline string fusing for 4 parallel strings per MPPT (8 pieces for 1
MPPT and 16 pieces for 2xMPPTs)
o
MC4 branch connectors x 12 (to combine 2 x 16 panels for both
MPPTs
Parts Kit Box misc.:
o
Stickers and Traffolytes required for the installation
o
Screws and Dynabolts selection for fixing unit to wall and floor
(incl. 2x wall plates)
o
Selection of glands for cable entry (suitable for 25mm and
32mm conduit)
