CAPACITY CUT-OFF:
This program sets the maximum charge capacity.
If the delta-peak voltage is not detected nor the safety
timer expires, this feature will automatically stop the
process at the selected capacity value.
KEY BEEP/BUZZER:
The beep sound is activated on key press.
Buzzer/melody for program completion. These
can be turned on/off.
INPUT POWER LOW:
This program alters the input battery voltage.
LANGUAGE:
Change language.
These programs are only suitable for charging and discharging lithium batteries
with a nominal voltage of 3.3v, 3.6v and 3.7v per cell. These batteries need to
adopt a different technique when charging. A constant voltage (CV) and constant
current (CC) method. The charge current varies according to the battery capacity
and performance. The final voltage of charge process is also very important; it
should be precisely matched to the below values. They are 4.2v for LiPo,
4.1v for Li-ion, and 3.6v for LiFe. The charge current and nominal voltage for each
cell must always be correct for the battery to charge.
Summary of Contents for SPIDER 1s
Page 5: ...2 Exterior of the unit Input power cable AC100 240V 3...
Page 22: ...Note...
Page 23: ...RoHs...
