RedbacK Racing SPIDER 1s, Operating Manual

Page: 9 / 23

-
7
-
5. Initial Parameter set up (Users' set up)
On first using the Spider 1 charger in User set mode it will offer default values
When you are ready to alter the parameter value in the program, press Start/
Enter key to make it blink then change the value with INC or DEC key. The value will
be stored by pressing Start/Enter key once.
The screen displays the nominal voltage of Lithium
battery. There are three kinds of Lithium battery;
LiFe(3.3V),Lilo(3.6V) or LiPo(3.7V). Please pay
attention to the nominal voltage of your selected
.battery
T h e c h a r g e r w i l l r e c o g n i s e t h e c e l l c o u n t o f
b a t t e r y automatically when charging. However the
battery can be perceived incorrectly if discharging. To
prevent the error, you can set the time to accurately
verify the cell count. Normally 10 minutes is enough.
For large capacity battery this time may need to increase.
If using auto detect please ensure the charger has selected
the correct cell count before proceeding.