RED SCARLET-X Page 20 Operation Manual Download

Page: 20 / 160

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-H

DSMC MODULES

WARNING:

The DSMC modules are NOT HOT SWAPPABLE, meaning you cannot remove or install the modules

while the camera is powered on. Before installing or removing modules, you MUST power down the camera.

Failure to do so may result in damage to the modules or DSMC that will not be covered under warranty.

PRO I/O MODULE

The PRO I/O MODULE brings together the essential I/O connections into one module, providing a central hub

for professional audio and video components.

Centralized ports make it easy to manage connections and cables.

LCD/EVF port allows you to connect an additional RED LCD or EVF.

Customize triggers and interface with third-party GPIO and RS232 control devices using RED PRO I/O

cables.

Attach an additional DSMC module or a REDMOTE to the back of the PRO I/O MODULE for additional ex-

pansion.

Internal cooling system maintains appropriate operating temperature.

PRO I/O MODULE

Summary of Contents for SCARLET-X




























































































































































Search results

Summary of Contents for SCARLET-X

Reviews:

Related manuals for SCARLET-X

Brands by name

Popular brands

RED SCARLET-X, Operation Manual

Search results

Summary of Contents for SCARLET-X

Reviews:

Related manuals for SCARLET-X

Brands by name

Popular brands