RED SCARLET-X Page 91 Operation Manual Download

Page: 91 / 160

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-H

SYSTEM STATUS

The System Status menu displays key project and system information on the following tabs: Project Status,

Module Status, Camera Info.

PROJECT STATUS

Displays the currently selected camera and project settings.

MODULE STATUS

Displays which modules are attached to the BRAIN.

Not Detected

: The module is either not attached, or is not detected by the BRAIN.

Attached

: The module is attached and detected.

CAMERA INFO

Displays the following camera information:

Model

: Includes camera type (EPIC or SCARLET) and sensor type.

Version

: Current firmware version.

P.I.N.

: The personal identification number that is specific to your camera.

SVN revision

: The current revision number of your firmware.

Hours of operation

: The number of hours that your camera has been turned on.

MEDIA INFO

Displays the following media information:

Media Status

: Active media, module type.

Media Name

: Storage capacity, SSD type, and version/revision of the SSD.

Serial Number

: Serial number of the SSD.

Media Firmware Revision

: Firmware version on the SSD.

Media Size

: Total capacity on the SSD.

Media Space Available for Recording

: Total capacity left on the SSD that can be recorded to.

Maximum Data Rate

: The maximum data rate when writing files to the SSD.

NOTE:

When an SSD is not attached, the Media Info tab displays the following: “No Active Media Found”.

Summary of Contents for SCARLET-X




























































































































































Search results

Summary of Contents for SCARLET-X

Reviews:

Related manuals for SCARLET-X

Brands by name

Popular brands

RED SCARLET-X, Operation Manual

Search results

Summary of Contents for SCARLET-X

Reviews:

Related manuals for SCARLET-X

Brands by name

Popular brands