COPYRIGHT © 2015 RED.COM, INC
RED DSMC MEDIA OPERATION GUIDE
955-0047, REV-R | 34
ATTACH EPIC/SCARLET SIDE MEDIA MODULES
Follow the instructions in this section to attach any of the following modules to an EPIC or SCARLET camera:
RED MINI-MAG Side SSD Module
Carbon Fiber RED MINI-MAG Side SSD Module
DSMC 1.8" SSD Side Module
DSMC 1.8" SSD Side Module (DRAGON)
Carbon Fiber DSMC 1.8" SSD Side Module (DRAGON)
WARNING:
DO NOT attach the carbon fiber side SSD module using any screws except the red screws that are
provided. Using other screws, including the screws that come with the standard aluminum camera or side SSD
modules, will strip the through holes and damage the panels of the carbon fiber EPIC/SCARLET. For more
information, go to
“Carbon Fiber Side SSD Module Installation Notes” on page 32
.
WARNING:
Damage to the camera, side SSD module, or other components of the camera system caused by
mixing carbon fiber components with non-carbon-fiber components is not covered under warranty, and may
void the warranty for both the camera and the side SSD module. For more information, go to
Fiber and Aluminum Components” on page 7
REQUIRED TOOL:
T10 TORX
®
driver
1. Place the side media module on the camera, so that the mounting holes of the module align with the screw
holes of the camera.
2. Use a T10 TORX driver to tighten the four (4) screws by about two (2) turns in a cross pattern (“X” pattern).
DO NOT FULLY TIGHTEN.
The screw types for the side SSD modules are listed below:
‒
Aluminum side SSD modules
: Black M3x0.5 x 6 mm or M3x0.5 x 5.5 mm cap screws.
‒
Carbon fiber side SSD modules
: Red M3x0.5 x 6 mm cap screws that come with the carbon fiber EPIC/
SCARLET.
3. Tighten the four (4) cap screws evenly. DO NOT exceed 70 in-oz, or damage may occur.
WARNING:
DO NOT OVERTIGHTEN.
4. Insert the SSD in the SSD slot on the back of the side media module:
‒
RED MINI-MAG module
: Install the RED MINI-MAG.
‒
DSMC 1.8" SSD Side Module
: Install the REDMAG 1.8" SSD.
NOTE:
DO NOT attempt to insert the RED MINI-MAG in any DSMC 1.8" SSD Side Module, and do not
attempt to insert the REDMAG 1.8" SSD in any RED MINI-MAG module.
Tighten Screws
