DSMC FAN 2.0 UPGRADE KIT (BOTTOM)
This kit includes the following components:
2.0 bottom fan assembly
Fan grill
T10 TORX driver
Two (2) M3x0.5 x 6 mm cap screws
One (1) ESD-safe solder stick
DSMC FAN 2.0 UPGRADE KIT (TOP/BOTTOM)
This kit includes the following components:
2.0 Top Fan Assembly
EPIC-X (black) or SCARLET-X (gray) top vent scoop
T6 TORX driver (short)
T8 TORX driver
Two (2) M2x0.4 x 4 mm cap screws (top)
2.0 bottom fan assembly
Fan grill
T10 TORX driver
Two (2) M3x0.5 x 6 mm cap screws (bottom)
One (1) ESD-safe solder stick
NOTE:
For EPIC and SCARLET cameras, the DSMC Fan 2.0 (Bottom) and the DSMC Magnesium PL Mount 2.0 are
not natively compatible with each other, since the fan grill prevents the lens mount locking ring from rotating. To use
these devices together, remove the lower tabs from the locking ring using a T8 TORX driver.
ADDITIONAL RESOURCES
The following resources offer additional information about RED, the DSMC system, and the RED community:
RED.com
: Check the
for the latest information about RED products.
RED Learn Articles
: RED offers
about RED cameras, post-production, and digital
cinematography.
RED Downloads
: Go to
to download the latest firmware, operation guides, and post-production
software.
DSMC Toolkit
: Go to
to find the DSMC Toolkit, which offers many helpful tools and resources to
customize and improve your camera workflow.
RED Support
: Check the
for FAQs, or to file a support ticket.
In-Camera Help
: Select the Help button on an in-camera screen to open up the help for that screen.
REDUSER
: Discuss all things RED on the
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
8
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
