5. Install the fan grill by pointing the top of the fan grill downward and sliding both tabs into the slots below the
DSMC Front Body Cap, so that the grill lies flat on top of the fan assembly.
Figure: Install Fan Grill
6. Use a T10 TORX driver to install the two (2) M3x0.5 x 6 mm cap screws (included) that attach the fan grill to the
BRAIN. DO NOT FULLY TIGHTEN.
Figure: Install Cap Screws
7. Tighten the M3x0.5 x 6 mm screws evenly. DO NOT exceed 70 in-oz, or damage may occur.
WARNING:
DO NOT OVERTIGHTEN.
8. Reattach the lens mount, lens, and any DSMC accessories that you removed from the BRAIN.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
1 3
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
