3. Carefully push the white connector into the appropriate slot on the BRAIN, using the ESD-safe solder stick for
assistance if necessary.
You will hear a click when the connector is successfully attached to the BRAIN.
Figure: Connect Fan
4. Insert the new fan assembly so that the fan bumpers are facing away from the camera, and that the label on the fan
is facing inward toward the camera. Keep the front of the fan assembly tilted forward, and make sure that the
connector cables are under the surface.
NOTE:
DO NOT push the fan assembly into the seat all the way. Installing the fan grill secures the fan assembly.
Figure: Insert Fan
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
1 2
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
