red lion GEMINI 1000, Instruction Manual

Page: 50 / 60

APPENDIX “D” - GEMINI FUNCTION COMMAND CODE SUMMARY (Con’t)
–48–
CODE MODE DESCRIPTION COMMENTS
54 OUTPUT 2 TERMINATION (Con’t)
+/-5 Terminate after Output 2 Time Delay
+/-6 Boundary Automatically selects [51 1].
55 NA OUTPUT 2 TIME DELAY (Gemini 2000 Only) Range 0.01 to 599.99 sec.
61 RIGHT-HAND DUMMY ZEROS
1 1 Dummy Zero
2 2 Dummy Zeros
3 3 Dummy Zeros
4 No Dummy Zeros
63 SAMPLE TIME IN SECONDS (rate only)
1 1
2 2
3 5
4 10
5 20
6 50
66 “OPERATOR ACCESSIBLE FUNCTIONS” MODES “PGM DIS” Terminal connected to “COMM.”
- (+) Reset Button & “RST” Terminal Enabled Front panel reset can be independently disabled by using DIP switch.*
- (-) Reset Button & “RST” Terminal Disabled* Both front panel and rear terminal are disabled
+/-1 No Functions Enabled
+/-2 Preset Programming Enabled
+/-3 Scale Factor Programming Enabled
+/-4 Preset & Scale Factor Programming Enabled
P(1) NA PRESET 1
Up to +/-999999
P(2) NA PRESET 2
SF(3) NA SCALE FACTOR Up to +/-5.9999
* Polarity sign is displayed in front of the identifier, a (-) sign is displayed, a (+) sign is not.