Decimal Point Position
Programmable for display of 0 to 5 digits right of
decimal point.
Count Input Mode
This parameter controls the Count / Control function of
Inputs A and B. It also allows Input B to be used as a User
Input when only uni-directional counting is required.
-17-
Count Modes
Input A signal is used for the count input. Input B is used in combination with
Input A for Count Direction Control, Quadrature counting, Anti-coincidence
Add/Subtract, or Anti-coincidence Add/Add counting applications.
C1-USR
- The unit counts one count on every negative edge of the input signal
at Input A. In this mode, Input B acts as a user input and has no effect on the
count function.
C2-USR
- The unit counts one count on every negative edge of the input signal
and one count on every positive edge of the input signal at Input A. In this
mode, the input signal is effectively doubled. Input B acts as a user input and
has no effect on the count function.
C1-UD
- The unit counts one count on every negative edge of the input signal
at Input A. The direction of the count is determined by the logic state of Input
B. A high level at Input B causes the unit to count in a positive direction. A
low level causes the unit to count in a negative direction.
C2-UD
- The unit counts one count on every negative edge of the input signal
and one count on every positive edge of the input signal at Input A. In this
mode, the input signal is effectively doubled. The direction of the count is
determined by the logic state of Input B. A high level at Input B causes the
unit to count in a positive direction. A low level causes the unit to count in a
negative direction.
AD-SUB
- This mode effectively separates count pulses that may simultaneously
appear at the two inputs. The C48C processes the count pulses into a string
of time separated pulses, so the internal counter does not miss any count
pulses. Input A serves as the add input (count increments) and Input B serves
as the subtract input (count decrements).
AD-AD
- This mode effectively sums count pulses that may simultaneously
appear at the two inputs. The C48C processes the count pulses into a string
of time-separated pulses so the internal counter does not miss any count
pulses. Input A serves as an add input (count increments) and Input B serves
as an additional add input (count increments).
MODE
DESCRIPTION
No decimal Point
Decimal point for 10ths
Decimal point for 100ths
Decimal point for 1000ths
Decimal point for 10,000ths
Decimal point for 100,000ths
MODE
Input A
Input B
*
Count X1;
Count on falling edge
User Input B (See
UsrInb parameter)
Count X2;
Counts on both edges
*
Count X1;
Counts on falling edge
Count X2;
Counts on both edges
Up/Down control;
Input B high = Up
Input B Low = Down
Add count;
Counts on falling edge
Subtract count;
Counts on falling edge
Add count;
Counts on falling edge
Add count;
Counts on falling edge
Quadrature X1 Input
Quadrature X1 Input
Quadrature X2 Input
Quadrature X2 Input
Quadrature X4 Input
Quadrature X4 Input
Up/Down control;
Input B high = Up
Input B Low = Down
User Input B (See
UsrInb parameter)
*
- These are the
only count
input modes
available on
the Prescaler
Output model.
Summary of Contents for C48C
Page 1: ...THE 1 16 DIN COUNTERS MODEL C48C INSTRUCTION MANUAL...
Page 6: ......