manualshive.com logo in svg

RecSol RECSPEED-2021P, Installation Manual, Page: 29 / 48

Share
Download
RecSol RECSPEED-2021P Installation Manual Download Page 29

The “Welcome” Panel

If you are installing EnterNet 300 for the first time, or if you were presented the “Existing
Installation Detected” panel and you clicked the “Yes” button, the next panel you will encounter is
the EnterNet “Welcome” panel. This panel will advise you to exit all other programs before
proceeding with the installation process.

The “Software License Agreement  Panel” (continued)

This panel presents you with an opportunity to view the EnterNet ReadMe file, which contains
helpful information about installing EnterNet and getting support for it. Clicking the “View ReadMe”
button will launch your default text editor (usually Microsoft Notepad) and open the EnterNet
ReadMe file for your review. The installer will remain paused while you review the file. You should
close the ReadMe file before proceeding with EnterNet installation.
This panel also presents the Software License Agreement, the terms of which you must accept in
order to proceed with EnterNet installation. By pressing the “Yes” button you are indicating that
you have read, understand, and agree to comply with the terms and conditions of the Software
License Agreement.

Summary of Contents for RECSPEED-2021P

















































Reviews:

No comments