2.
Insert the
RECSPEED-2021P ADSL MODEM
CD into you computers CD drive.
3.
The
Install From Disk
window appears. In the text entry bar type in your systems CD drive
location letter (
D
for example ), followed by a colon (
:
), then a back slash (
\
), followed by the
RFC1483 driver for Windows 95 For example, type in:
D:\BEoA\Win95
Then click
O
K.
4.
When the
Service Option
window appears, click
Advance
d.
5.
The
Service Options
window appears indicating the
Connection Addres
s. &
select ADSL mode
Enter in the
VPI
and
VCI
values provided by your ISP. Make sure the
Framing
is set to
LLC/SNA
P
In the
Select ADSL Mode
section , select the mode(s) recommended by your ADSL service
provider. Click on the mode(s) required and then click
ok
NOTE
: The service mode type will be one of the following
ANSI T1.413 Issue 2
ITU G. 992.2 Annex A (G.lite)
ITU G. 992.1 Annex A (G.dmt)
6.
The previous
Service Option
window will appear, click
Nex
t.
NOTE:
During the installation process you may be asked to insert your Windows 95 CD. Insert the
Windows 95 CD
into your systems CD drive and click
O
K. If during the file copying process a file is
reported as “not found” enter the path <CD Drive letter> and
:\Win95
(e.g.
D:\Win9
5)
7.
At the conclusion of the RECSPEED-2021P driver installation, the
Diagnostic Tool
icon (see
Appendix A) will appear disabled on the task bar. You must now
Restart
the PC system to
complete the installation; the
Diagnostic Tool
will then become active.
8.
Proceed to Making an Internet connection for Bridged Ethernet.
Go to page 25
.
Bridged Ethernet over ATM (RFC 1483) – Windows 95B
1.
The
Add New Hardware Wizard
will detect the RECSPEED-2021P ADSL NIC as a
PCI
Network Controlle r,
click
Next.
2.
Insert the
RECSPEED-2021P ADSL MODEM
CD into the CD-ROM drive.
3.
The
Update Device Driver Wizard
will detect the
R ECSPEED-2021P ADSL PC NI
C. Click
Other Location
s.
4.
When
Select Other Location
window appears, in the text entry bar type in your systems CD drive
location letter (
D
for example ), followed by a colon (
:
), then a back slash (
\
), followed by the
RFC1483 driver for Windows 95 . For example, type in:
D:\BEoA\Win95
Then click
O
K.
5.
When the
Service Option
window appears, click
Advance
d.
6.
The
Service Options
window appears indicating the
Connection Addres
s.&
select ADSL mode
Enter in the
VPI
and
VCI
values provided by your ISP. Make sure the
Framing
is set to
LLC/SNA
P
In the
Select ADSL Mode
section , select the mode(s) recommended by your ADSL service
provider. Click on the mode(s) required and then click
ok
Summary of Contents for RECSPEED-2021P
Page 38: ......