RecSol RECSPEED-2021P, Installation Manual, Page: 18 / 48

NOTE: If no previous network devices have been installed, then the Network Neighborhood
icon will not be present on the desktop. To open the Network window, double-click My
Computer then Control Panel then Networ k.
15. The Network Settings Change window appears. It prompts Do you want to restart your
computer now? Click Yes.
NOTE: After the system restarts the Diagnostic Tools icon will appear on the task bar. Both panels of
the Diagnostic Tool icon should appear black signifying a good connection.
16. You must now make a dial-up network connection. To begin a dial- up connection, double-click My
Computer, then double-click Dial-Up Networkin g.
NOTE: If this is the first dial- up connection created, the Location Information window will appear.
Enter in an area code (e.g. 408) for your region, then click Close. The Dial-Up Networking window
appears, Click OK to add an entry. Enter a name for the New phonebook entry (e.g. MyDialUpServe r)
and click Nex t. When the Server window appears click Nex t.
17. The Dial-Up Networking window prompts for the phone number of the dial-up server. Unless
instructed to enter a phone number by the ISP, enter zero “0” Still at the Dial-Up Networking
window, click More.
18. The Edit Phonebook Entry window appears. Select the Security tab and verify that Accept only
Microsoft encrypted authentication is selected. Click O K. The previous Dial-Up Networking
window appears, click Dia l.
19. The Connect to MyDialUpServer window appears. Enter the User name, Password and Domain
supplied by your Internet Service Provider (ISP). Click O K.
NOT E: If this screen persists and a connection logon error is reported, confirm that the
correct User name and Password are entered and try the connection again. Also verify that
the connection address is correct.
The Connection Complete window is displayed at the completion of a successful Dial-Up logon. Choose
a display behavior and click OK to close.