RecSol RECSPEED-2021P, Installation Manual, Page: 16 / 48

Point to Point Protocol over ATM (RFC 2364) - Windows 2000
1. The Add New Hardware Wizard will detect
the RECSPEED-2021P ADSL NIC as a PCI Network Controlle r , click Next.
2.Still in the Add New Hardware Wizard window, select Search for the best driver
for your device. (Recommended ), click Next
3.Again in the Add Ne w Hardware Wizard window,
select Specify a location option , then click Next.
4.Insert the CD labeled R ECSPEED-2021P ADSL MODEM into your systems CD drive,
then type D:\PPPoA\Win2000 (D for example). And then click Next .
5. The Add New Hardware Wizard will find the driver, click Next .
6. When the Add New Hardware Wizard ask about additional installation, click Yes.
7. When the Service Options window appears, click Advanced .
The Service Options window now indicates the Network Protocol and PVC setting section.
Type your provided values from service provider in the VPI and VCI columns. And then
make sure the Framing setting as VC MUX . In the Select ADSL Mode section, select the
mode(s) recomanded by your ADSL service provider. Click on the mode(s) required and then
click Ok .
NOTE : The service mode type will be one of the following
ANSI T1.413 Issue 2
ITU G. 992.2 Annex A (G.lite)
ITU G. 992.1 Annex A (G.dmt)
8. The previous Service Option s window will appear, click Next .
NOTE : During the installation process you may be asked to insert your Windows 2000 CD.
Insert the Windows 2000 CD into your systems CD drive and click OK.
9.The Add New Hardware Wizard appears, click Finish .
10.When the System Settings Change window appears and asks; Do you want to restart
your computer now? Click Yes .
11.You will find new icon on your monitor.