Record Power TS200C, Original Instruction Manual

Page: 9 / 36

4. Saw Unit Assembly
- cont.
CAUTION
Many of the items are very heavy.
We recommend that assistance is
sought before trying to lift the larger
components.
Note: When assembling this table saw,
Do not fully tighten the nuts and bolts
until the assembly is complete.
4.2 Stand Assembly
1. Locate the first leg and secure it to one of the
long top brace supports using the nuts, bolts
and washers supplied
Fig.4.1 and Fig.4.1B .
2. In the same way, attach the second leg to the
brace support
Fig.4.2 .
3. Locate the short top brace supports and fix
the to the legs as shown
Fig.4.3 .
4. Continue in this way until all of the legs and
top brace supports have been fitted
Fig.4.4 .
5. Locating holes a third of the way down each
leg are for securing the mid brace supports. Fix
the long mid brace supports to the frame using
the nuts, bolts and washers
Fig.4.5 .
6. Finally, fit the short mid brace support to one
of the shorter sides
Fig.4.6 .
Note
The side without the short mid brace
support fitted will be referred to as the
front of the stand. This leaves the front
area free for wheel kit operation.
8 9
SHORT TOP BRACE
SUPPORTS
LONG TOP BRACE
SUPPORT
Fig.4.1
Fig.4.2
Fig.4.3
Fig.4.4
Fig.4.6
FRONT
LONG MID BRACE
SUPPORT
Fig.4.1B
Fig.4.5