Record Power TS200C, Original Instruction Manual

Page: 15 / 36

14 15
5. Rip Fence Assembly
5.1 Identification of rip fence components
1. 4 x Hex. nuts
2. 8 x Washers
3. 1 x Front fence bar
4. 2 x Hex. socket screws
5. 2 x Hex. bolts, washers(4) & hex. nuts (each)
6. 1 x Rear rail
7. 1 x Aluminum fence
8. 1 x Fence carrier
9. 1 x Extraction hose support
10. 1 x 'U' Piece
11. 2 x Pan head screw, hex. nuts (each)
1
2
3
4
5
6
7
8
9
10
11
5.2 Fixing the fence bar
Locate fence bar onto the table Fig.5.1A and fix
with the two fence fixing bar nuts and washers
(four fence fixing bar nuts and washers for
optional table extension bar). With those nuts and
washers in place on the other side of the table
Fig.5.1B Secure the fixing Fig.5.2A but do not
fully tighten yet as they may need to be adjusted
later in the setup process.
5.3 Fixing the fence scale
Locate fence scale onto the table Fig. 5.2B and fix
with two pan head screws (four pan head screws
for optional table extension fence scale).
Fig.5.1B
Fig.5.1A
FENCE BAR
FIXING NUTS
& WASHERS
Fig.5.2A
Fig.5.2B