www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
19
44
-
3060/44
-
3080IM
-
AC
Install the ReadyLIFT bump stop ex-
tension nut plate into the frame by
inserting into the frame pocket.
Ro-
tate the insert until the locks on the
frame
are under the plate keys.
Place the ReadyLift Bump Stop Ex-
tension Washer between the bump
stop and vehicle. Install the Ready-
LIFT bump stop extension using pro-
vided
3/8”
x
5.5”
long Allen head
bolt and washer
. Torque to
35 ft
-
lbs
.
Take the factory bump stops and
grind the top edge at a slight angle
to aid in installation later. Drill out
the top of the bump stop with a
1/2”
drill bit
3/4”
deep.
Use a soap and water solution to aid
in installation, push the bump stops
into the ReadyLIFT extensions with a
twisting motion. Make sure they fully
seat.
