PRO-SERIES ATHENE - VARIABLE RATE DRILL CONTROL
2
Electromagnetic Compatibility (EMC)
This product complies with Council Directive 2004/108/EEC
when installed and used in accordance with the relevant
instructions.
IMPORTANT, READ THIS BEFORE USING THE PS ATHENE
The Pro-Series Athene installation is a part of the Precision
Farming System ("the System"). It is very important that you
follow the described calibration procedures before operating
the Pro-Series Athene instrument. Calibration and operation
of the Pro-Series Athene must be in accordance with these
instructions. Use of the System is subject to the following
disclaimer;
1. So far as is legally permissible RDS Technology ("RDS"), or its
distributors, shall not be liable, whatever the cause, for any
increased costs, loss of profits, business, contracts, income,
or anticipate savings or for any special, indirect or
inconsequential damage whatsoever (death or personal injury
excluded).
2. The capabilities and functions of the Precision Farming
System ("the System") are limited as set out in the
specification of the System, details of which are contained in
the Help files and product literature and which must be read
before using the System.
3. Without prejudice to the generality of the above it is hereby
acknowledged that the System is not designed nor intended
to a) originate variable treatment plans or b) achieve or avoid
any application rate outside application parameters, which in
both cases shall be the responsibility of the operator.
4. The standard terms and conditions of RDS (except clause 7),
a copy of which is available on request, apply to the supply
and operation of this System.
Service and Technical Support
PLEASE CONTACT YOUR NEAREST RDS DISTRIBUTOR If
unknown then contact RDS Technology Ltd for further
information,
Tel :
+44 (0) 1453 733300
Fax :
+44 (0) 1453 733311
e-mail :
web :
www.rdstec.com
Our policy is one of continuous improvement and the
information in this document is subject to change without
notice. Check that the software reference matches that
displayed by the instrument.
© Copyright RDS Technology Ltd 2012
\UK683210.DOC
