ATHENE 100
– SPREADER RATE CONTROLLER
8
3
Forward Speed Display
The forward speed is displayed in km/hr.
3.1
Low Speed Alarm
If the forward speed drops below 0.5 km/hr, the instrument defaults to a
flashing forward speed display and the instrument beeps.
The belt drive will
stop.
The instrument will return to the application rate display when forward speed
increases above 0.5 km/hr.
The belt drive will re-start.
3.2
High Speed Alarm (Under-application)
If your forward speed exceeds the maximum beyond which the target
application rate cannot be achieved, then the instrument defaults to a
flashing forward speed display and beeps continuously.
The instrument will return to the application rate display when forward speed
is reduced sufficiently for the target rate to be met.
