10
4.2
Mounting
Additional material required (not included in the scope of supply):
•
At least 3 to 6 screws with a diameter of 6 to 8 mm.
•
Suitable dowels.
•
Suitable washers with a minimum outer diameter of 18 mm.
Procedure:
Mount the wall bracket as shown left.
Use at least 3 screws (ø 6-8mm),
3 washers (outside ø min. 18mm)
and the appropriate dowels.
Loosen the inverter's left and right-sided locking
screws at the top.
Hook the Power Storage DC with the retaining bolts on
both sides into the recesses of the wall mounting
bracket.
Tighten the locking screws again to secure the
inverter.
Check that the inverter is securely fastened.
