ENGLISH
Before connecting and using this product, please read this instruction manual carefully and keep
it on hand for future reference. The manual is to be considered an integral part of this product and
must accompany it when it changes ownership as a reference for correct installation and use as well
as for the safety precautions.
RCF S.p.A.
will not assume any responsibility for the incorrect installation and / or use of this
product.
WARNING
: to prevent the risk of fire or electric shock, never expose this product to rain or humidity
(except in case it has been expressly designed and made for outdoor use).
SAFETY PRECAUTIONS
1.
All the precautions
, in particular the safety ones,
must be read with special attention
, as they
provide important information.
2.1 POWER SUPPLY FROM MAINS (direct connection)
a.
The mains voltage is sufficiently high to involve a risk of electrocution; therefore,
never
install or connect this product with the power supply switched on.
b.
Before powering up, make sure that all the connections have been made correctly and the
voltage of your mains
corresponds to the voltage shown on the rating plate on the unit
,
if not, please contact your
RCF dealer
.
c.
The metallic parts of the unit are earthed by means of the power cable. In the event that the
current outlet used for power does not provide the earth connection,
contact a qualified
electrician
to earth this product by using the dedicated terminal.
d.
Protect the power cable from damage; make sure it is positioned in a way that it cannot be
stepped on or crushed by objects.
e.
To prevent the risk of electric shock,
never open the product
: there are no parts inside that
the user needs to access.
2.2 POWER SUPPLY BY MEANS OF AN EXTERNAL ADAPTER
a.
Use the dedicated adapter only; verify
the mains voltage corresponds to the voltage
shown on the adapter rating plate and the adapter output voltage value and type
(direct / alternating)
corresponds to the product input voltage
, if not, please contact your
RCF dealer
; verify also that the adapter hasn’t been damaged due to possible clashes /
hits or overloads.
b.
The mains voltage, which the adapter is connected to, is sufficiently high to involve a risk
of electrocution: pay attention during the connection (i.e. never do it with wet hands) and
never open the adapter.
c.
Make sure that the adapter cable is not (or cannot be) stepped on or crushed by other
objects (pay particular attention to the cable part near the plug and the point where it leads
out from the adapter).
3.
Make sure that no objects or liquids can get into this product, as this may cause a short circuit.
4.
Never attempt to carry out any operations, modifications or repairs that are not expressly described
in this manual.
Contact your authorized service centre or qualified personnel should any of the following occur:
• the product does not function (or functions in an anomalous way);
• the power supply cable has been damaged;
• objects or liquids have got into the unit;
• the product has been subject to a heavy impact.
5.
If this product is not used for a long period, switch it off and disconnect the power cable.
6.
If this product begins emitting any strange odours or smoke,
switch it off immediately and
disconnect the power supply cable
.
IMPORTANT NOTES
