7
6
HEADPHONE SET DESCRIPTION
(continued)
5 Stereo LED indicator light
6
VOLUME
control
7
AUTO SCAN
button
RECHARGING THE HEADSET
To recharge the headset unit verify that the ON/OFF Switch is in the
OFF position. Place the headphones into the recharging
cradle/transmitter with the red Power LED indicator light (4) on the
right headphone facing the front of the unit. The contacts (3) on the
right headphone should come into contact with the charging prongs (3)
on the cradle/transmitter. Rotate the headphone toward the back of the
unit to lock headphone into charging position. If the headphones are
placed correctly, the charging contact leads (3) will touch the charging
prongs (13). At that point, the red
charging LED indicator light on the
recharging cradle/transmitter
(8) illuminate.
RECHARGING CRADLE/TRANSMITTER
The recharging cradle/transmitter acts both as a transmitter of the
signal to the headphones as well as the recharging base.
8 Charging LED indicator light
9 Audio signal LED indicator light
10 DC IN power supply socket
11 Left and Right AUDIO inputs
12
CHANNEL
switch
13 Charging prongs
SUPPLIED ACCESSORIES
This headphone system includes accessories that enable you to use your
wireless headphone set in a number of ways. (See section on Operation
and Standard Usage, page 10)
Main power adapter
(AC/DC: 120 V ~ 60 Hz, 12 V = 150 mA)
3.5mm/.25 inch jack adaptor
10
11
12
5
6
7
9
8
13
RCA to 3.5mm cable
Off indicator:
incorrect
recharge
On indicator:
correct recharge
WHP151 US IB REVC_K.qxd 4/30/07 9:42 AM Page 6
