Player Menus
23
Sound settings
You can adapt your player to other equipment and
access specific functions with the Sound menu.
1.
Select the Sound option in the main menu using the
up/down arrow buttons and press OK.
2.
Select an option using the left/right arrow buttons,
and press OK.
Play
Night Mode
You can use this function to control the different sound levels via dynamic compression. It
improves the quality of the sound track at a low volume and quiets the loudest sounds. Select an
option using the up/down arrow buttons: Quiet, Moderate or Off.
Note: This function is available only on DVD discs recorded in Dolby Digital.
Distance
Basic settings have been preset for the speakers included with your unit. However, to suit the
acoustic conditions in your listening room and to make the sound more effective, you may need
to delay the signal coming from some of the speakers. Channel delay compensates for center or
surround speakers that are closer to the listening position than the front speakers.
1.
Select Front, Center or Rear using the and buttons and press OK.
2.
Adjust the distance using the and buttons and press OK.
Note: The receiver speaker distance default settings are the following:
Front speakers (L/R): 4.5 m
Center speaker (Cch): 3 m
Rear speaker (SUR): 3 m
Test tone
This function is used to test the speaker setting and change the speaker level. A short noise comes
successively from each speaker. Adjust the volume level using the up/down arrow buttons.
Downmix
This function can process a multi-channel audio source to a two-channel stereo signal.
The options are: Stereo and Off.
Play
Play Mode
Parental Control
Display
Sound
Languages
Distance
Test Tone
Downmix
Night Mode
RDT170
1/31/05, 7:46 AM
23